CHAMPION CX-0098 Aquarium Air Pump (Power-5.3 W) with Double Hole Fish Tank Oxygen Pump Speed

How to Use the Product:

The Champion air pump is easy to install and operate. First the air pump must be placed in a dry place above the aquarium. If the lid of the aquarium can be placed on the aquarium. Particular attention should be paid to the above. Otherwise, the pump may cause water to return to the pump. After the pump is placed in a suitable place, the pump is ready for use by fitting the hose to the end of the air outlet pipe according to the air motor. The hose is placed in the aquarium and the plug is turned on after the plug is plugged into the outlet and the pump starts and it is fully functional within a few hours.

Warnings:

• Before using the pump, check the socket where it will be installed. Faults in the outlet can cause deterioration of the tool.
• The location of the outlet and pump where the pump is to be installed is important. It needs to be up and far away in a place that it cannot get wet.
• If the pump is placed in the down position from the aquarium, the pump may be broken as there will be a backflow of water.
• Care should be taken to keep the pump in a dry place above the aquarium. It should not be dropped into the aquarium. In the event of downfall it could not be taken out from the water without unplugging. It may cause electric shock.
• If the pump falls into the water, the plug should be dried and let it dry for a few days. It can be run again after being sure it is dry.
• The pump must remain running continuously. It can also work during cleaning as long as the hose is disconnected and attention is paid to avoid water. Cleaning is recommended only if the plug has been pulled.
• Never Lubricate
• Hose control must be done once a week. For this purpose, it should be check whether there is some air blowing through the end of the hose. In case of clogging, blockages should be eliminated using a special hose brush.